Screen the affordable-housing renovation in Sun Valley, Los Angeles CA for Red List materials (2026-07-10)

The affordable-housing renovation in Sun Valley, Los Angeles CA has finishes and furnishings of unknown chemical content; nobody has screened them against the LBC Red List. Standard: LBC Materials petal Red List screen Proof: photo evidence + GPS + field readings per red_list_materials checklist Method (Living Building Challenge Materials petal Red List screening, ~45-90 min): 1. Confirm the address; walk the space methodically room by room. 2. Photograph each finish (flooring, wall, ceiling, sealant, casework) with any legible product labels. 3. Inventory each material with its product name/manufacturer where visible. 4. Flag each item against the Red List (e.g., PVC, formaldehyde, phthalates, halogenated flame retardants). 5. Recommend a compliant alternative for each flagged item. 6. Enter the material inventory, Red List flags, alternatives, and photos; sign. Equipment: tablet/clipboard, camera, LBC Red List reference, flashlight Done when: Material inventory of the in-scope finishes recorded; Red List flag recorded per item; Compliant alternative recommended per flagged item; Photos + address confirm

Where

affordable-housing renovation, Sun Valley, Los Angeles CA

Pay

$120 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

photo evidence + GPS + field readings per red_list_materials checklist

This is exactly what gets it approved. Nothing settles without it.

Level

advanced

Open until

2026-10-09

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: Living Building Challenge Materials petal Red List screening

Bring

• tablet/clipboard
• camera
• LBC Red List reference
• flashlight

Steps

1. 1. Confirm the address; walk the space methodically room by room.
2. 2. Photograph each finish (flooring, wall, ceiling, sealant, casework) with any legible product labels.
3. 3. Inventory each material with its product name/manufacturer where visible.
4. 4. Flag each item against the Red List (e.g., PVC, formaldehyde, phthalates, halogenated flame retardants).
5. 5. Recommend a compliant alternative for each flagged item.
6. 6. Enter the material inventory, Red List flags, alternatives, and photos; sign.

If it does not match the plan

• Suspected asbestos-containing material that is friable or damaged (crumbling, dust, airborne risk) -> STOP-WORK: do not disturb, restrict access to the area, and route to a licensed asbestos inspector before any work continues (EPA/AHERA).
• Suspected lead paint on a surface slated for disturbance (sanding/demolition) in a pre-1978 building -> flag as EPA RRP-regulated; route to a Lead-Safe Certified firm; the agent documents, never scrapes or does destructive testing.
• Suspected asbestos/lead-containing material (intact/undisturbed) -> do not disturb; flag and stop.
• Unlabeled material -> mark 'unknown - request product data' rather than guessing.

What counts as done

• Material inventory of the in-scope finishes recorded
• Red List flag recorded per item
• Compliant alternative recommended per flagged item
• Photos + address confirm

Proof is measured against these, not judged by taste.