advanced work · a working ranch parcel off County Road 45, Glendo, WY 82213
Soil-organic-carbon baseline for the cover-crop zones, a working ranch parcel off County Road 45, Glendo, WY 82213
The rancher adopting cover crops on this parcel wants to measure soil carbon change over time, but has no organic-carbon baseline; without one, any future carbon-building claim is unverifiable. Standard: USDA-NRCS/COMET stratified SOC + bulk density; SDG 13.2 Proof: GPS grid + depth cores + bulk-density + COC to lab + management note Method (USDA-NRCS / COMET soil organic carbon baseline (stratified cores + bulk density, lab SOC by dry combustion), ~60-120 min): 1. Confirm the field + management zone; record GPS; lay out stratified sampling points by soil type / slope position. 2. At each point, take cores at defined depth increments (e.g., 0-10 and 10-30 cm); record each depth. 3. Collect a known-volume bulk-density sample at each depth (needed to compute carbon per area). 4. Composite same-depth cores per zone; bag, label, and complete chain-of-custody to the lab for SOC% by dry combustion. 5. Photograph the site, a soil profile, and each sampling point; note land use and management history. 6. Record the GPS grid, depths, bulk-density samples, COC number, and photos into the proof record; sign. Equipment: soil core sampler / auger, bulk-density ring (known volume), depth tape / markers, sample bags + labels, GPS phone, camera, chain-of-custody + data sheet Done when: Stratified cores at defined depths recorded per zone; Bulk-density sample collected per depth increment; Composited samples bagged + chain-of-custody to an accredited lab; GPS grid + profile/point photos + management-history note
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: USDA-NRCS / COMET soil organic carbon baseline (stratified cores + bulk density, lab SOC by dry combustion)
Bring
- soil core sampler / auger
- bulk-density ring (known volume)
- depth tape / markers
- sample bags + labels
- GPS phone
- camera
- chain-of-custody + data sheet
Steps
- 1. Confirm the field + management zone; record GPS; lay out stratified sampling points by soil type / slope position.
- 2. At each point, take cores at defined depth increments (e.g., 0-10 and 10-30 cm); record each depth.
- 3. Collect a known-volume bulk-density sample at each depth (needed to compute carbon per area).
- 4. Composite same-depth cores per zone; bag, label, and complete chain-of-custody to the lab for SOC% by dry combustion.
- 5. Photograph the site, a soil profile, and each sampling point; note land use and management history.
- 6. Record the GPS grid, depths, bulk-density samples, COC number, and photos into the proof record; sign.
If it does not match the plan
- SOC% is lab-measured, not field-read -> mark result 'pending lab'; make NO on-site carbon claim.
- Very low SOC / bare compacted zones observed -> flag as priority for carbon-building practices.
- Do not claim a carbon credit or retirement from this baseline alone — it establishes a starting point for later re-measurement.
What counts as done
- Stratified cores at defined depths recorded per zone
- Bulk-density sample collected per depth increment
- Composited samples bagged + chain-of-custody to an accredited lab
- GPS grid + profile/point photos + management-history note
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.