Run the quarterly filter-cartridge swap round for San Luis homes (2026-07-19)

A water filter with a spent cartridge is worse than no filter — families keep trusting water that's no longer being treated. A quarterly swap round through invited San Luis homes keeps every installed filter actually protecting the people who rely on it. Standard: NSF/ANSI filter maintenance schedule practice; SDG 6. Proof: Photo per swap + updated sticker + route log Method (NSF/ANSI filter maintenance schedule practice; SDG 6.): 1. Work the route list of homes with installed filters and confirm each visit. 2. Shut the supply, swap in the correct new cartridge, and reset any change indicator. 3. Flush per instructions and check joints dry. 4. Log the swap date on the unit's sticker. 5. Photograph each swapped cartridge and updated sticker with date and GPS. Done when: Photo per swap + updated sticker + route log

Where

Invited homes route, San Luis, AZ 85349

Pay

$152 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Photo per swap + updated sticker + route log

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-10-18

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: EPA drinking-water sampling (3Ts / LCR first-draw where lead is in scope)

Bring

• GPS-capable phone
• test kit for each named analyte (nitrate/coliform/arsenic/lead as specified)
• clean sample bottle + label
• nitrile gloves
• camera

Steps

1. 1. Navigate to the sampling point; confirm GPS is inside the posting radius; record the waypoint.
2. 2. Photograph the tap or wellhead with a legible timestamp.
3. 3. If first-draw is required, sample after >=6h stagnation; if flushed, run the tap 2-3 minutes first, then sample.
4. 4. Fill the bottle without touching the inside; cap immediately.
5. 5. Run each test per kit instructions; wait the exact develop/incubation time; read and record every value with units.
6. 6. Record coliform as present/absent after the stated incubation window.
7. 7. Enter all readings, units, GPS, time, and photos into the proof record; sign it.

If it does not match the plan

• Nitrate > 10 mg/L -> tag 'exceeds EPA MCL'; advise no infant consumption pending certified-lab confirmation.
• Total coliform present -> advise disinfection + retest; recommend lab confirmation.
• Arsenic > 10 ppb or Lead > 15 ppb -> tag exceedance; recommend certified-lab confirmation before any consumption guidance.

What counts as done

• GPS waypoint recorded inside the posting radius
• Timestamped photo of the exact sampling point
• Each required analyte recorded with a numeric value + units (or present/absent)
• Sampling type (first-draw vs flushed) explicitly noted

Proof is measured against these, not judged by taste.