Build new planting beds at a host-invited Cully community garden

Cully has strong community-garden energy and long waitlists — beds, not gardeners, are the bottleneck. Each new framed bed with clean soil puts one more family into food production within walking distance of home. Standard: OSU Extension community garden guidance; SDG 2 (Zero Hunger). Proof: before/after photos of the built, filled, labeled beds Method (OSU Extension community garden guidance; SDG 2 (Zero Hunger).): 1. Confirm the garden host's invitation and the bed locations and dimensions. 2. Cut and assemble untreated lumber frames and set them level on the prepared ground. 3. Line the base with cardboard and fill with the garden's soil-and-compost mix. 4. Rake the beds smooth and label them for their assigned gardeners. 5. Photograph the finished beds filled and labeled, GPS-tagged and dated. Done when: before/after photos of the built, filled, labeled beds

Where

Host-invited community garden near NE Simpson St & NE 60th Ave, Portland, OR 97218

Pay

$200 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

before/after photos of the built, filled, labeled beds

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-09-18

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 60–120 minutes. Method of record: USDA/SARE sustainable vegetable production + Cooperative Extension Master Gardener practices; People's Garden bed establishment. Hand-tool, DIY-safe food growing on tested/known-clean soil or raised beds.

Bring

• GPS-capable phone
• camera
• garden fork/broadfork + hand trowel
• finished compost + rake
• seeds or transplants (labeled)
• mulch (straw/leaf)
• watering can or hose

Steps

1. 1. Confirm the bed location inside the posting radius; record the GPS waypoint and photograph the bed before work.
2. 2. Clear weeds and debris; loosen the top 8-12 inches with a fork/broadfork without inverting the soil profile.
3. 3. Spread 1-2 inches of finished compost and rake the bed level.
4. 4. Sow seeds to the depth/spacing on the packet, or set transplants at their correct depth, in labeled rows.
5. 5. Water in gently to settle the soil around seeds/roots.
6. 6. Apply a light straw/leaf mulch between rows to hold moisture, keeping it off seedling stems.
7. 7. Record the crop plan, spacing, and a watering/harvest cadence for the next visit.
8. 8. Enter crop list, GPS, before/after photos, and the care cadence into the proof record; sign.

If it does not match the plan

• Soil is untested near a pre-1978 structure, old orchard, or roadway (possible lead/contaminant) -> do not plant edibles in-ground; use a raised bed with clean imported soil and flag for a soil test.
• Out-of-season crop or a hard frost in the forecast -> adjust the crop choice or protect with cover; do not sow into a predictable loss.
• Signs of active pest/disease on transplants -> reject the affected stock and note it; never introduce a known infestation to the bed.

What counts as done

• GPS waypoint recorded inside the posting radius
• Before and after photos of the planted bed
• Crops sown/transplanted at packet-correct depth and spacing, in labeled rows
• Bed watered in and mulched, with a watering/harvest cadence recorded

Proof is measured against these, not judged by taste.