Clear the ember-fuel debris from the gutters of an invited single-story Talent home (2026-07-19)

A gutter full of dry leaves and needles is a tray of kindling bolted to the roofline — exactly where wind-blown embers land first. In the fire-rebuilt blocks of Talent, seasonal gutter clearing is not just moisture care, it is ignition prevention. Standard: NFPA Firewise structure ignition guidance (debris-free gutters and roof edges); SDG 11 (Sustainable Cities and Communities). Proof: before/after gutter photos with debris removed off-site Method (NFPA Firewise structure ignition guidance (debris-free gutters and roof edges); SDG 11 (Sustainable Cities and Communities).): 1. Confirm the host's invitation and walk the roofline from the ground to spot debris load. 2. Clear gutter debris using a ground-based gutter pole tool with a mirror or camera check. 3. Flush each downspout until it runs free. 4. Bag the dry debris and remove it from the 0-to-5-foot home zone entirely. 5. Photograph gutters before and after and the bagged debris, GPS-tagged and dated. Done when: before/after gutter photos with debris removed off-site

Where

Invited single-story homes near Wagner Creek Rd, Talent, OR 97540

Pay

$180 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

before/after gutter photos with debris removed off-site

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-10-19

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: NFPA 1144 / Firewise USA structure-ignition-zone defensible-space assessment — documentation-only from a safe public/yard vantage

Bring

• camera with zoom
• GPS-capable phone
• tape measure or pace-count reference
• Firewise USA zone checklist
• field notebook

Steps

1. 1. Document only — photograph Zone 0 (0-5 ft from the structure), Zone 1 (5-30 ft) and Zone 2 (30-100 ft) from the driveway or yard edge; never enter dense brush or approach a structurally questionable outbuilding.
2. 2. Note vegetation type, spacing and ladder-fuel presence (brush touching tree canopy) in each zone from the safe vantage.
3. 3. Photograph the roof material, gutters, vents, and any firewood or combustible material stacked against the structure.
4. 4. Compile the zone-by-zone findings into a defensible-space checklist naming what a licensed/credentialed vegetation-management crew should clear first; never clear, cut, or move anything during this survey.

If it does not match the plan

• Any combustible material (mulch, firewood, dry vegetation) touching the structure in Zone 0 -> flag as highest-priority clearing item.
• Ladder fuel (brush contacting tree canopy) found in Zone 1 -> flag for a credentialed crew's thinning pass.
• Any structurally unstable or fire-damaged outbuilding observed -> do not approach; note location only and route to the local fire authority.

What counts as done

• Photo set covering all three ignition zones from a safe, named vantage point
• Roof/gutter/combustible-storage condition photographed
• Zone-by-zone checklist compiled naming the follow-on clearing job

Proof is measured against these, not judged by taste.