Hand-clear the flat defensible-space zones the Fallbrook surveys flagged (2026-07-20)

The ignition-zone surveys leave each Fallbrook home a list of small-fuel work on flat ground: dry grass to cut, dead fronds to drag, mulch to pull back from siding. Hand tools on walkable lots handle most of it — the highest-value fire work an untrained person can safely do. Standard: CAL FIRE Defensible Space (PRC 4291) zone standards — SDG 15. Proof: Before/after zone photos per home Method (CAL FIRE Defensible Space (PRC 4291) zone standards — SDG 15.): 1. Work from the survey list with the occupant's invitation confirmed, on flat walkable ground only. 2. Cut dry grass and weeds with hand tools and string trimmers within the first 30 feet. 3. Drag dead branches and fronds to the green-waste pile and pull flammable mulch a foot back from siding. 4. Photograph each zone before and after with GPS and date. Done when: Before/after zone photos per home

Where

Invited flat lots near E Mission Rd and Stage Coach Ln, Fallbrook, CA 92028

Pay

$380 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before/after zone photos per home

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-10-19

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: NFPA 1144 / Firewise USA structure-ignition-zone defensible-space assessment — documentation-only from a safe public/yard vantage

Bring

• camera with zoom
• GPS-capable phone
• tape measure or pace-count reference
• Firewise USA zone checklist
• field notebook

Steps

1. 1. Document only — photograph Zone 0 (0-5 ft from the structure), Zone 1 (5-30 ft) and Zone 2 (30-100 ft) from the driveway or yard edge; never enter dense brush or approach a structurally questionable outbuilding.
2. 2. Note vegetation type, spacing and ladder-fuel presence (brush touching tree canopy) in each zone from the safe vantage.
3. 3. Photograph the roof material, gutters, vents, and any firewood or combustible material stacked against the structure.
4. 4. Compile the zone-by-zone findings into a defensible-space checklist naming what a licensed/credentialed vegetation-management crew should clear first; never clear, cut, or move anything during this survey.

If it does not match the plan

• Any combustible material (mulch, firewood, dry vegetation) touching the structure in Zone 0 -> flag as highest-priority clearing item.
• Ladder fuel (brush contacting tree canopy) found in Zone 1 -> flag for a credentialed crew's thinning pass.
• Any structurally unstable or fire-damaged outbuilding observed -> do not approach; note location only and route to the local fire authority.

What counts as done

• Photo set covering all three ignition zones from a safe, named vantage point
• Roof/gutter/combustible-storage condition photographed
• Zone-by-zone checklist compiled naming the follow-on clearing job

Proof is measured against these, not judged by taste.