Clear invasive giant reed from a public Santa Clara River access point near Fillmore (2026-07-19)

The Santa Clara River corridor near Fillmore carries a well-documented invasive giant-reed problem that crowds out native willow and cottonwood and burns hotter than native growth when dry vegetation catches. Hand-cutting arundo at the public access point opens room for native replanting. Standard: California Invasive Plant Council arundo-removal protocol; watershed-health restoration — SDG 15. Proof: Before/after photos of the cleared arundo patch Method (California Invasive Plant Council arundo-removal protocol; watershed-health restoration — SDG 15.): 1. Confirm the removal area is the public access point, not private farmland. 2. Identify arundo by its distinct tall cane growth before cutting. 3. Cut young arundo canes at the base by hand with loppers or a hand saw. 4. Bag and remove cut material for proper disposal. 5. Photograph the cleared patch with GPS and date. Done when: Before/after photos of the cleared arundo patch

Where

Public river access near Central Ave, Fillmore, CA 93015

Pay

$240 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Before/after photos of the cleared arundo patch

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-10-19

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 30–60 minutes. Method of record: EPA dry-weather / AMD field screening

Bring

• GPS phone
• pH meter or strips
• conductivity meter
• ammonia + iron test kit as specified
• surfactant screen if specified
• gloves
• camera

Steps

1. 1. Navigate to the outfall/reach; record GPS; photograph it, capturing any visible flow or staining.
2. 2. Note whether flow is present in dry weather (yes/no).
3. 3. Measure and record pH, conductivity, and each specified analyte per kit instructions.
4. 4. Log any color, odor, floc, or aquatic-life observation.
5. 5. Enter all readings with units, GPS, time, and photos into the proof record; sign.

If it does not match the plan

• Dry-weather flow present with elevated conductivity/ammonia/surfactants -> flag suspected illicit discharge for the responsible agency.
• pH < 6 with visible iron floc -> tag suspected acid mine drainage; recommend metals lab panel.

What counts as done

• pH + conductivity recorded with units
• Each specified analyte recorded with a value
• Dry-weather flow present? recorded yes/no
• GPS waypoint + timestamped photo

Proof is measured against these, not judged by taste.