Anyone can start here · public low-water crossing on US Highway 377 over the South Llano River, south of Junction, TX 76849
Document debris and gravel-bar buildup at a public low-water crossing on US 377, site 2, public low-water crossing on US Highway 377 over the South Llano River, south of Junction, TX 76849 (2026-07-24)
A public low-water crossing on US 377 south of Junction carries drifted gravel and log debris with no photo record of the buildup, and the next Hill Country flash-flood downpour could pile water higher across the crossing than county road crews expect. Standard: FEMA floodplain + green-infrastructure siting screen, applied here to Hill Country flash-flood-alley low-water crossings and roadside ditches around Junction. SDG 11.5 disaster resilience. Proof: dry-conditions confirm + document-only stand-off photo log + debris-type note + GPS + ranked follow-on note Method (FEMA floodplain + green-infrastructure siting screen, applied here to Hill Country flash-flood-alley low-water crossings and roadside ditches around Junction. SDG 11.5 disaster resilience.): 1. 1. In dry conditions with no flowing water across the crossing, observe and photograph the crossing's debris and gravel-bar buildup from the road shoulder. 2. 2. Never step onto the crossing slab itself or into the channel; stay on the dry road shoulder or bank the entire visit. 3. 3. Note the approximate debris type (gravel, log jam, trash) and whether it appears to be narrowing the flow path. 4. 4. Record a ranked follow-on note naming the crossing for the county road department's debris-clearing crew. Done when: dry-conditions confirm + document-only stand-off photo log + debris-type note + GPS + ranked follow-on note
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: FEMA floodplain + green-infrastructure siting screen
Bring
- GPS phone
- tape/ruler for deposition depth
- metals field kit (if sediment screen in scope)
- boots + gloves
- camera
Steps
- 1. Confirm post-event conditions are safe; navigate to the site; record GPS.
- 2. Photograph deposited sediment / affected area.
- 3. Measure deposition depth at representative points.
- 4. If a sediment contaminant screen is in scope, run the metals field kit and record values.
- 5. Note debris, hazards, and the extent (sketch).
- 6. Enter depth, any analytes, hazard notes, GPS, photos into the proof record; sign.
If it does not match the plan
- Unstable ground / submerged debris / contaminated water -> document from safe footing; do not enter.
- Elevated metals in deposited sediment -> flag before any reuse; recommend lab confirm.
What counts as done
- Deposition depth recorded at representative points
- Metals screen recorded (if in scope)
- Debris/hazard note + extent sketch
- GPS waypoint + timestamped photos
Proof is measured against these, not judged by taste.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.