Fell and remove a documented hazard tree, tree 3 -- the Bald Rock Road rebuild corridor, Berry Creek, CA 95916.

The survey flagged this standing dead or fire-scarred tree as a real falling risk to the road or a rebuilt home nearby; an ISA-TRAQ licensed faller felling and removing it in sections closes that risk for good.

Where

the Bald Rock Road rebuild corridor, Berry Creek, CA 95916 · Open the map

Pay

$420 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

ISA-TRAQ assessment record + before/after photos + felling-plan/exclusion-zone photo + haul-disposition photo + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

advanced

Open until

2026-10-19

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• the tree-risk assessment on file + the land manager's or owner's removal authorization + any local tree-removal permit
• ANSI Z133 crew: qualified arborist plus a second qualified person in view at all times
• saws maintained to spec, felling wedges, rigging and lowering gear rated for the load
• chainsaw chaps, helmet with face and hearing protection, gloves and boots
• drop-zone control: cones, tape, signage and a spotter for the public edge
• camera + GPS phone

Steps

1. 1. ASSESS: photograph the tree and the target area, and confirm the written risk assessment, the removal authorization and any permit before a saw comes out of the truck.
2. 2. Walk the site for overhead conductors, structures, and the public edge; if a conductor is within the fall or rigging path, stop and route to the utility.
3. 3. Establish and control the drop zone with cones, tape and a spotter, and hold a documented pre-cut briefing covering the plan, the escape routes and the abort signal.
4. 4. Remove the tree by the planned method (sectional rigging or directional felling), with a second qualified person in view for every cut.
5. 5. Process and remove the material to the agreed disposal route, and cut the stump to the specified height or grind it if the packet calls for it.
6. 6. VERIFY: photograph the cleared site from the before vantage, confirm no hanger is left in an adjacent tree, and log the disposal route and the crew of record in the proof record.

What counts as done

• ISA-TRAQ hazard-tree assessment record naming the lean direction and target fall zone
• Before photo of the standing tree
• Felling-in-progress photo showing the enforced exclusion zone and crew PPE (helmet, chaps, eye/ear protection)
• After photo of the cleared stump/site + haul-disposition record for the felled material

Proof is measured against these, not judged by taste.