resident homes along FM 343 on the edge of Rusk, Cherokee County, TX 75785 (own-home)
Install WaterSense low flow fixtures.
This home at resident homes along FM 343 on the edge of Rusk, Cherokee County, TX 75785 (own-home) still runs older, high Read all of it
Not funded yet. Settles as earned credit, $220 proposed.
Proof it takes, the deadline, the level
- Proofbefore after flow rate readings per fixture plus WaterSense label photo plus leak retest plus GPS
- Open until2026-10-13
- Levelintermediate
All of it: the words, the place, the proof
This home at resident homes along FM 343 on the edge of Rusk, Cherokee County, TX 75785 (own-home) still runs older, high flow fixtures; swapping them for WaterSense labeled aerators, a showerhead, and a dual flush toilet is a direct water efficiency repair.
Fund it for $220. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Photograph each existing fixture and take a before flow rate reading.
- 2. Shut off local supply and remove the old fixture with hand tools only.
- 3. Install the WaterSense labeled replacement per manufacturer instructions.
- 4. Take an after flow rate reading and photograph the WaterSense label of each installed fixture.
What counts as done
- Before flow rate reading (gpm) per targeted fixture
- WaterSense label photo of each installed fixture
- After flow rate reading confirming the reduction, never left leaking
Proof is measured against these, not judged by taste.
The standard this serves
Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789307498292_3bxgbco","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789307498292_3bxgbco