← Board

a resident's own home bedroom, Groves, TX 77619 (Jefferson County); best-estimate location near the town center, exact address not confirmed

Place a portable air cleaner sized to the room, a resident's own home bedroom, Groves, TX.

This home sits inside the Golden Triangle refinery corridor, and the resident's bedroom window faces the flare stacks with nothing filtering the Read all of it

Not funded yet. Settles as earned credit, $165 proposed.

Claim this job

Proof it takes, the deadline, the level
  • Proofbaseline PM2.5 reading + unit sizing record + placement photo + post-run PM2.5 reading + GPS
  • Open until2026-10-04
  • Levelentry
All of it: the words, the place, the proof

This home sits inside the Golden Triangle refinery corridor, and the resident's bedroom window faces the flare stacks with nothing filtering the room's air between flare events and ordinary days -- the house has window units, not ducted central air. A portable HEPA unit sized to the room's floor area, placed and run today, changes the air in that one room with no ductwork and no wiring.

Fund it for $165. Proof lands onchain when it's done.

Where
a resident's own home bedroom, Groves, TX 77619 (Jefferson County); best-estimate location near the town center, exact address not confirmed. Open the map
Pay
$165 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof
baseline PM2.5 reading + unit sizing record + placement photo + post-run PM2.5 reading + GPS

This is exactly what gets it approved. Nothing settles without it.

Level
entry: anyone can start here
Open until
2026-10-04
Posted by
0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

How this work is done

A documented method, so this packet comes out the same whoever does it.

Steps

  1. 1. Measure the room's floor area and ceiling height, and confirm the chosen unit's Clean Air Delivery Rate (CADR) meets EPA's room-size guidance (CADR at least two-thirds of the room's floor area in square feet).
  2. 2. Take a baseline PM2.5 reading with a handheld particulate meter at the room's breathing-height center point, doors and windows in their normal position, before placing the unit.
  3. 3. Place the unit on a stable, unobstructed surface clear of curtains and furniture that would block intake or discharge, and plug it into an existing grounded outlet -- no wiring, no outlet modification.
  4. 4. Run the unit at its rated setting for the manufacturer's stated air-change interval, then take a second PM2.5 reading at the same point and record the percent reduction.
  5. 5. Photograph the placed, running unit and label it with the room name, model, and CADR rating for the resident's own record.

What counts as done

  • Baseline PM2.5 reading at the room's center point before placement
  • Unit model, CADR rating, and room floor-area calculation matched per EPA sizing guidance
  • Photo of the placed unit running on a stable, unobstructed surface
  • Second PM2.5 reading after the stated run interval showing a measured reduction

Proof is measured against these, not judged by taste.

The standard this serves

Indoor Air Quality. Indoor air quality is the health of the air where people actually live, and most of us are indoors nine hours in ten. The standards give it numbers: carbon dioxide that tells whether fresh air is reaching a room, fine dust, fumes from finishes, moisture that invites mold. Mastery looks like reading a room's air the way a doctor reads a pulse, and knowing which fix matters first. It is learned meter in hand. This packet is one room measured honestly, and one measured room is worth a hundred guesses.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789315341582_455uv5w","funderWallet":"0xYOU"}.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund
Vote for it, free Pledge backing, free Fund this work, $165

Packet WORK_1789315341582_455uv5w